|  | 

Shoe Polisher Security Bracket
Purchase of the SB-35 Security Bracket allows you to anchor your Beck Shoe Polisher to prevent it from being removed from it’s preferred location. This security bracket is attached to your polisher by removing the feet and re-inserting them through the holes in the bracket. The bracket is then anchored to the wall with four toggle bolts. Follow the steps below to securely attach your bracket.
Step 1: Remove the screw-in rubber feet on the bottom of your polisher.
Step 2: Place the security bracket on the table with the longest surface resting on the table top.
Step 3: Line up the holes for the feet over the holes in the bracket. Tilt back, insert the threaded shaft of the feet through the holes of the bracket and screw tightly in the holes in the polisher bottom.
Step 4: Position the bracket where you want to permanently affix it to a wall or other surface. Mark the holes with a pencil or other marking object. Drill the holes as marked and insert the supplied toggle bolts. Fasten tightly in place.
Your polisher is now safe and secure.
|
|